1. Measuring Range: 0~15000mm, at steel velocity

2. Pulse Repetition Frequency: 20Hz ~ 2000Hz

3. Material Velocity: 1000 ~ 20000m/s

4. Pulse Repetition Frequency ranges: 20Hz ~ 2000Hz

5. Dynamic range:  >40dB

6. System Linearity: Horizontal: +/-0.2% FSW,

7. Vertical: 0.25% FSH, Amplifier Accuracy +/-1dB.

8. Resolving Power:  >40dB

9. Sensitivity Leavings:  >50dB (Deep 200mm, Ф2 flat-bottomed hole)

10. Reject (suppression): 0~80% full screen height

11. Noise: less than10%

12. Gate Monitors: Two independent gates controllable over entire sweep range

13. Gain: 110dB max in selectable resolution 0.1, 1.0, 2.0, 6.0dB.

14. Bandwidth (amplifier bandpass ): 0.2 ~ 20 MHz

15. Pulse Displacement:  >32dB

16. Display Delay: -20 ~ 3400µs

17. Probe Delay/Zero Offset : 0 ~ 99.99µs

18. Test Modes: Pulse echo, dual element and thru-transmission

19. Pulser: Tunable Wave Pulser

20. Pulse Energy: 100V, 200V, 250V, 300V, 500V selectable

21. Rectification: Positive half wave, negative half wave, full wave, RF

22. Units: Inch or millimeter

23. Transducer Connections: BNC or LEMO

24. Power Requirements: AC Mains 100~240 VAC, 50~60Hz

25. Operating Temperature: -10℃ ~ 50℃, Storage Temperature: -30℃ ~ 50℃