Stone Grip, Non-Slip Tile Treatment Porcelain, Ceramic & Stone Floors.

May 16,2024

Stone Grip will dramatically increase traction and improve safety on wet stone floors. Easy to apply with a sprayer, microfiber T-mop or Stone Grip Applicator..
DESCRIPTION Our best seller! Stone Grip Non-Slip Tile Treatment for Porcelain Tiles, Ceramic Tiles & Stone Floors. Stone Grip anti-slip tile and stone floor treatment will dramatically increase traction and improve safety on slippery floors even when wet. The slip resistance will surpass guidelines recommended by ADA/ANSI for floor safety, work best in wet barefoot or shoe conditions. Stone Grip is an easy to apply slip solution with a sprayer, microfiber T-mop or Stone Grip Applicator. Follow the instructions to clean and dry the floor, apply the anti-slip grip treatment and rinse it off. Stone Grip anti-slip coating creates microscopic treads to increase traction on tiles, concrete and stone floors in minutes. APPLICATOR of Stone Grip (Click here to buy) - $12 Even when wet, your slippery floor’s slip resistance after the non-slip solution will surpass ANSI A137.1, A326.3 or B101.3 standards. 0.59* Wet DCOF - ANSI B101.30.63* Wet DCOF – ANSI A137.1 / A326.30.72* Wet SCOF - ANSI B101.1 Testing was performed at SlipDoctors office using a BOT-3000E. Please contact us for detailed test results. Actual results may vary. Stone Grip is ideal for any indoor or outdoor situations for use on all porcelain, stone or ceramic surfaces with little or no change in appearance. Very effective for submerged or underwater flooring, like pool steps and hot tubs. Have questions about this product? Be sure to view the FAQs Installation Instructions (TDS) Safety Data Sheet (SDS) PRODUCT FEATURES HOW IT WORKS: Stone Grip anti-slip tile and stone floor application works with the minerals in the natural flooring surface to microscopically transform the surface by creating micro-treads that increase traction. After treatment of the anti-slip coating, these micro-treads create more “grip” on tile or concrete that helps prevent slips and falls…especially on wet surfaces…with little or no change the appearance. Perfect for indoor and outdoor use. Available in quart (treats up to 100 sq. ft) and gallon (treats up to 400 sq. ft). SIMPLE & EFFECTIVE: Stone Grip's anti-slip has no odor and requires minimal surface prep prior to the treatment. Ideal for any indoor or outdoor area. Read and follow label instructions carefully. Clean and dry the slippery floor, perform a test on your tile to determine treatment time, apply Stone Grip's non-slip liquid using a microfiber T-mop or garden tank sprayer, neutralize with a mixture of baking soda & water (or plenty of water), rinse and that’s it! No dry time…Stone Grip anti-slip grip makes your surface ready for immediate use! Typical treatment time is 5-15 minutes. ON-GOING MAINTENANCE: The best way of preventing slips and retaining slip resistance after the Stone Grip application is a strong maintenance plan. Find out how SlipDoctors recommends cleaning the flooring once the Stone Grip non-slip treatment has been applied. SPECIFICATIONS Quart Gallon 4-Gallon Case Coverage per Sq Ft 75 400 1,600 Cost per Sq Ft (Appx.) $0.60 $0.21 $0.20 Applicators Included - - 1 Volume (liters) 0.97 3.78 18.92 INSTRUCTIONS REQUIRED SUPPLIES: • 2 Buckets or 2 small tank sprayers • Microfiber T-mop (Do not use string mop head) or Stone Grip Applicator • Rubber-soled shoe for testing the floors before, during and after treatment • Baking soda for neutralizer in confined areas without drains (optional)• Wet/Dry vacuum or Squeegee (optional) REQUIRED SAFETY EQUIPMENT: • Chemical-resistant gloves must be worn at all times • Clothing to cover all skin areas • Eye protection • Rubber boots • Mask (optional) NOTE: Avoid solution contact with all metal and glass surfaces. If possible, remove these items temporarily from the area to be treated; or use waterproof duct tape or plastic to fully cover these surfaces. Use special precautions with drain covers in a shower, bathtub or wet area. When opening the container, keep the opened container on the surface that is to be treated in case of a spill. Do not set bottle on countertops. Always use towels on ground to avoid spills. APPLICATION INSTRUCTIONS: PREPARATION: Surface Preparation: Thoroughly clean the surface to be treated prior to treatment using a pH-neutral or slightly acidic cleaner. For new floors, make sure all grout residues are removed from the tiles. The floor may need to be rinsed multiple times to remove all former cleaning products. PERFORM TEST - ALWAYS TEST PRODUCT ON FLOORS FIRST Step 1: Sample Testing: Before initial treatment, test on one tile in an inconspicuous area of your floor. Thoroughly clean and dry the test tile. Spread a small amount of the solution completely over the test tile and note the time. Every 30 seconds, use a rubber-soled shoe to apply downward pressure and try to slide the shoe along the treated surface. DO NOT LET STONE GRIP DRY ON THE SURFACE. When you feel you have achieved the level of slip resistance you desire, rinse the test tile with water or neutralizer. Make note of the total amount of time you left the solution on the tile. Typically, this time will be between 5-15 minutes. This is not a case where longer treatment time is better. It is important not to over-treat the surface. As soon as there is a reasonable resistance to the pressure of the shoe, you should apply the neutralizer. You can perform multiple tests if you are unsure of the initial test results. Step 2: Review Test Results: Once you have achieved an acceptable level of slip resistance and applied the neutralizer, thoroughly rinse and dry the test tile and inspect it carefully to determine if there is any visible change in appearance. If there is a visible change, you can perform another test on a different untreated tile and reduce the treatment time. Continue the testing process as before and inspect the new results. Once you are satisfied with the test results, you are ready to treat the remaining floor area. If you are unable to determine the correct treatment time for your flooring, please contact SlipDoctors Technical Support for assistance. FULL APPLICATION: Step 1: Apply to Remaining Floor Area: Spread Stone Grip using a tank sprayer or bucket and applicator on an area ONLY as large as can be covered and subsequently neutralized consistent with the treatment time determined by the testing process. Do not let Stone Grip dry on the surface. Do not pour directly on the surface. It may be necessary to divide large areas into smaller sections for effective application. After the section has been treated for the amount of time determined in the testing process, apply plentry of water or neutralzier. Repeat the process for all sections until the entire floor has been treated. Thoroughly rinse the entire treated area with clean water and dry with wet vacuum or squeegee. MAINTENANCE: To maintain your slip-resistant surface, keep the surface clean and free from oil, grease and other contaminants by cleaning with an effective cleaner/degreaser, scrubbing with a deck brush to help remove build-up and rinsing thoroughly with clean water. We recommend using our Maintain Grip product to thoroughly clean the surface, remove grease build-up and renew the non-slip traction created by Stone Grip treatment. Maintain Grip can be purchased by calling us at 1-888-436-5404 or by visiting our website www.. IMPORTANT: Before using, buyer shall determine the suitability of the product for the intended use, and the user assumes all risk and liability whatsoever in connection therewith. No statement or recommendation not contained herein shall have any force or effect unless in an agreement signed by seller and manufacturer. Buyer assumes all risks and all responsibility associated with use and disposal. SlipDoctors cannot eliminate all possibilities of slip-and-fall accidents. Actual results will vary. HOW TO TEST STONE GRIP: HOW TO APPLY STONE GRIP: .
Our best seller! Stone Grip Non-Slip Tile Treatment for Porcelain Tiles, Ceramic Tiles & Stone Floors. Stone Grip anti-slip tile and stone floor treatment will dramatically increase traction and improve safety on slippery floors even when wet. The slip resistance will surpass guidelines recommended by ADA/ANSI for floor safety, work best in wet barefoot or shoe conditions.

Stone Grip, Non-Slip Tile Treatment Porcelain, Ceramic & Stone Floors.

Stone Grip Industrial (Gallon) Non-Slip Floor

The InvisaTread family of products helps to protect against the risk of slip and fall accidents at home, at work and at play. InvisaTread has been formulated to increase the slip resistance of most tile, stone and mineral surfaces. Slip resistant tile has never been so easy, safe or effective.